[TenTec] Sticky, goopy stick-on feet

[Dave Edwards]

I've had that happen on lots of stuff...A CD player, and an HP external tape 
drive, and a clock come to mind.
Probably early made in china product. They just break down...turn to almost 
paint, or grease.
...Dave
----- Original Message ----- 
From: "Ken Brown" <ken.d.brown at hawaiiantel.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Saturday, April 26, 2008 5:07 PM
Subject: [TenTec] Sticky, goopy stick-on feet


> Yuck! My Omni VI had some extra stick-on feet. Looks like a previous
> owner may have used a narrow shelf, and had the back of the rig hanging
> over, necessitating the extra feet a few inches forward of the regular
> feet. One of these feet was sticky liquid and made a big mess on my desk
> top and the bottom of the rig. The other was also gummy, but not liquid.
>
> I have never had this problem before, except in the past couple of
> years. Only two things I can think of  have changed in the last couple
> of years. One is that I am using Ten-Tec gear, and the other is that I
> live in Hawaii. I wonder if there is some kind of chemical reaction that
> occurs with the paint Ten-Tec uses and these stick-on feet? Or is the
> climate here is the cause? Is this problem common to all brands of stick
> on rubber feet? Or are there good brands that don't do this?
>
> DE N6KB
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec