[TenTec] PSK 31 with the Orion II

[Ron Castro]

Also, make sure your computer is putting out sufficient audio from the line 
out connector.  That can be adjusted within Windows.  Make sure all your 
cables are good (I got stung with a bad cable last week and thought it was 
something in the Orion!) and that there are no attenuators in the system 
that you didn't know about.

         Ron  N6IE
      www.N6IE.com


----- Original Message ----- 
From: "Wayne Whitman" <wwhitman at fastmail.fm>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Saturday, December 27, 2008 8:24 AM
Subject: Re: [TenTec] PSK 31 with the Orion II


> Ed - make sure the power is set to 100w, then control the power out with
> the audio drive.
>
>>From what you said, I'm assuming you have the audio input in the menu
> set to AUX or BOTH.
> You might try running the aux gain up all the way to see if you get
> anything in.
>
> 73,
> Wayne
> K4ELO
> k4elo at fastmail.fm
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>