[TenTec] 705 Mic Low Output Help Request

David & Chris Drake drakes at psci.net
Mon Feb 4 08:56:37 EST 2008


Are you running the 705 by battery or through the Omni V?  If through the 
Omni V, check the voltage at the jack first.  If by battery, check the 
battery.  Then check the plug before going inside it.
Good luck,
David

----- Original Message ----- 
From: "Greg Kuczek" <gjk1406 at verizon.net>
To: <tentec at contesting.com>
Sent: Sunday, February 03, 2008 10:23 PM
Subject: [TenTec] 705 Mic Low Output Help Request


>I have a 705 mic that I am having low output problems when used with an 
>Omni V. I've read that you can change out the R11 resisitor to 3300 ohms to 
>help correct this. Unfortunately I don't have a schematic or any 
>documentation to help me locate this resistor. Any help identifying R11 
>would be appreciated.
>
>  73 de Greg W9VOX
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> 




More information about the TenTec mailing list