[TenTec] Ten Tec Jupiter on PSK31

[Bob McGraw - K4TAX]

To the contrary, I use the supplied Tentec cables, with added connector 
gender and type adaptors, between the sound card and the Omni VII very 
successfully for RTTY and PSK-31.  Since both devices have Line Inputs and 
Line Outputs the levels and impedances match quite well.  Adjustments in the 
Omni VII and the soundcard Mixer adjustments handle any needed level 
adjustments with out any extreme maximum or minimum settings.  Thus no 
transformers, no pots, no attenuators needed.

I see no reason this approach would not work with the Jupiter.

73
Bob, K4TAX




----- Original Message ----- 
From: "Henry Mackey" <kb9cqo at embarqmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Monday, February 18, 2008 9:36 PM
Subject: Re: [TenTec] Ten Tec Jupiter on PSK31


> Rick,
>
> No. I have heard, but not knowing, that this is not a good idea. So to 
> appease myself I purchased from Donner Digital an interface, plugged it in 
> and away I went. Well wasn't quite that easy, but that is what I've been 
> using since about January of 04.
>
> 73 de Henry/n9hm
>
> ----- Original Message -----
> From: wo8l at aol.com
> To: tentec at contesting.com
> Sent: Sunday, February 17, 2008 4:47:58 PM (GMT-0500) America/New_York
> Subject: [TenTec] Ten Tec Jupiter on PSK31
>
> Anybody using the Jupiter on PSK with just the Ten Tec supplied chord 
> directly to the computer sound card with no TNC?
>
> Does this really work?? What settings on the rig are appropriate?
>
> Thanks,
>
>
> Rick
> WO8L
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>