[TenTec] paragon PLL error - Help me decide!

[DC]

If someone would be so kind to lead me to the offending boards I would 
appreciate it. I have a Paragon and am totally unfamiliar with the anatomy 
of this rig.  Perhaps a picture or two of the boards that may require 
re-soldering.

Thank you
73
KD8Z at ARRL.NET


----- Original Message ----- 
From: "Randy Hargenrader" <k4qo at earthlink.net>
To: <tentec at contesting.com>
Sent: Monday, January 14, 2008 2:45 PM
Subject: Re: [TenTec] paragon PLL error - Help me decide!


> My Paragon had that problem - its easy to fix by resoldering the PLL
> modules.  I didn't find it necessary to pull all the parts off, etc... I
> just reflowed the solder and the problem hasn't been back since.
>
> Mine had a bad solder joint due to temperature variations that
> eventually allowed a part lead to pull loose from the solder blob on the
> PCB.  Re-flow fixed it.
>
> 73,
> Randy
> K4QO
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>