[TenTec] 425 titan

Bob McGraw - K4TAX RMcGraw at Blomand.net
Thu Jan 17 22:46:24 EST 2008


For RTTY it is rated 1000 watts output for 10 minutes of transmit time with 
a 50% duty cycle.  i.e. 10 minutes transmit, followed by 10 minutes of 
receive.  Follow the TUNE UP procedure in the manual and do not over drive 
the amp.  Pay very close attention to Screen current and grid current.  Be 
sure the load/antenna is near 50 ohms i.e. SWR <1.5:1 before starting to 
tune the amp.  Start with 10 watts of drive from the exciter.

 While it is well protected, overdrive can make for expensive and sudden 
tube replacement needs.

And, if you don't have a manual, order one from Tentec.

73
Bob, K4TAX




----- Original Message ----- 
From: <W1dxh at aol.com>
To: <tentec at contesting.com>
Sent: Thursday, January 17, 2008 4:12 PM
Subject: [TenTec] 425 titan


> hello to all,
>                   i am a newbie to rtty  and was wondering if anyone has
> used the 425 titan  on rtty? at what power did you run it at, and is there 
> any
> thing i should know  before hand. thanks  any info appreciated. don't want 
> to
> smoke anything hi  hi.
>
> 73's,
> steve  w1dxh
>
>
>
> **************Start the year off right.  Easy ways to stay in shape.
> http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 




More information about the TenTec mailing list