[TenTec] Problem with Orion I

[pfizenmayer]

Dennis - When you press the MAIN or SUB audio buttons - do you see the line
change on the screen where it shows audio gain setting ? ALso looking at A12
81915 "Rear Connector Board" , without tracing completely thru the rest of
the circuit - it looks like if the plug J8 MT2 were loose - it would kill
both the internal and external speaker.

73 de Hank K7HP


----- Original Message ----- 
From: "Dennis Bryant" <brya5984 at bellsouth.net>
To: <tentec at contesting.com>
Sent: Saturday, January 26, 2008 9:08 AM
Subject: [TenTec] Problem with Orion I


>I turned on my Orion I this morning and I had no sound coming from the 
>outboard speaker. I unplugged the speaker and did not have sound on the 
>internal speaker. I did have sound on the phone jack. I performed the 
>following steps.
>
> 1. Master reset -- No change.
>
> 2. Major reset--Lost sound to phone jack. No other change.
>
> 3 Master reset -- Regained sound to phone jack. No other change.
>
> 4. Reloaded v2.062a--No change.
>
> 5. Master reset--No change.
>
> Do any of you have any other suggestions before I pack it up to send home 
> to mama? (Trading for an Orion II is, unfortunately, not an option at this 
> time.
>
>
> Thanks,
>
> Dennis
> N4MUS
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>