[TenTec] Corsair II Problem

[Dr. Gerald N. Johnson]

On Thu, 2008-03-20 at 16:59 -0700, Woody Hester wrote:
> My Corsair II often will not load more than 5-10 W & the receive signal is weak.  When I gently slap the rig on the right side it comes up to full power and the receive signal comes to normal.  I'm going to open it up this weekend to look for loose connections, cold solder joints etc.  I'm a hobbyist (business major) so any advice re: what to look at first appreciated.  The rig was brought up to factory specs / aligned by TT about 4 mos. ago, was given a clean bill of health and performed flawlessly until this developed recently.  Happy Easter to all!  Woody / WD9F
>        
Check the interconnecting cables and pins. They have caused problems
before.

73, Jerry, K0CQ