[TenTec] Using Jupiter on PSK31

[John Graves]

Winston,

I am using the cable with good results.  The connections are line in and 
line out, and match the line connections on my sound card in my laptop.  
Remember that you have to connect line in to line out.  I use VOX for 
control and it works FB.  You have to choose the line in on the menu to 
enable it.

I set my Jupiter for 100% power and then use the soundcard mixer control 
(sound out) to reduce the input audio to the point that the ALC light 
goes out.  That gives me about 35-40 watts output.

Regards,

John Graves
WA1JG
jh.graves at verizon.net



jones_winston at bellsouth.net wrote:
> I know this has probably been addressed here before....
> However, I want to use my Jupiter for PSK-31. Can I hook it straight into the sound card, using the supplied accessory cord, or is it better to use some form of interface?
> Any suggestions will be greatly appreciated.
>
> 73, Winston  K4CWQ
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>