[TenTec] HRD and computer control for OMNI VI ver.3

[albrooks7 at comcast.net]

Thanks for the response Ed. 

By the Matrix, are you referring to the option menu setup? I'm not quite sure what you mean.

Thanks, Al

-------------- Original message -------------- 
From: Ed <w3nr at comcast.net> 

> albrooks7 at comcast.net wrote: 
> > I have used HRD with my 756 PRO with no problems. I tried to use it with the 
> OMNI VI ver.3 with no luck. I am trying to use the 1/8" phone plug on the OMNI. 
> I have tried it with the 301 remote plugged in or not plugged in. It doesn't 
> seem to make a difference. I tried using the HRD parameters for both Ten Tec and 
> also the Icom 735. 
> > 
> > I've tried different baud rates and that doesn't seem to make a difference 
> either. 
> > 
> > I am using a generic USB interface cable that works fine on the Icom. 
> > 
> > Anybody have any experience with this? Any help will sure be appreciated. 
> > 
> > Thanks, Al K9XR 
> 
> 
> Make sure they are both set to the right hex address.....04 and the rig 
> matrix is turned off in the menu in the Omni. 
> 
> Ed W3NR 
> _______________________________________________ 
> TenTec mailing list 
> TenTec at contesting.com 
> http://lists.contesting.com/mailman/listinfo/tentec