[TenTec] Omni V problem, need help

[g p]

Thanks for replying. Obviously the Passband tunning would be the first thing to check and no that does not do much for the USB audio quality, it changes the tone a bit but it is still a flat very thin sounding signal. At this point the issue is beyond moving or turning any of the adjustments.
 
I appreciate everyone's help and look forward to some more ideas, inputs etc.
 
Thanks, Gil
 
 

--- On Sat, 11/8/08, Steve Hunt <steve at karinya.net> wrote:

From: Steve Hunt <steve at karinya.net>
Subject: Re: [TenTec] Omni V problem, need help
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Date: Saturday, November 8, 2008, 5:51 AM

Gil,

Have you checked the setting of the PassBand Tuning - that would be an 
obvious reason for USB and LSB to sound different. I find on my Omni VI 
the correct tuning doesn't quite correspond to the mid-position of the
knob.

73,
Steve G3TXQ


> Second SSB receive sounds fine on LSB, on USB sounds tiny with no bass or
body to the audio, adjusting C6 on the BFO board brings a little more body to
the audio but throws it off frequency.
>  
> Any help I can get with these problems would be appreciated, I would hate
to return the rig, it is awesome other wise.
>  
> Gil n2wjw
>
>   

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec