[TenTec] Fan For Titan 425

Ron Castro ronc at sonic.net
Thu Sep 4 12:47:13 EDT 2008


Jim:

I don't think there is a part number since this was a special mod that TT 
did in the factory by putting grommets between the motor and the squirrel 
cage housing, and they don't have any more available.  My fan was getting 
noisy, too, so I took it all apart and replaced the grommets, including the 
ones on the mounts, with a bunch from an assortment pack from Radio Shack. 
I also replaced the foam where the manifold from the fan inserts into the 
tube socket compartment.  It's much quieter now.

         Ron   N6IE
      www.N6IE.com


----- Original Message ----- 
From: "Jim Brown K9YC" <k9yc at audiosystemsgroup.com>
To: "Ten Tec List" <tentec at contesting.com>
Sent: Thursday, September 04, 2008 9:39 AM
Subject: [TenTec] Fan For Titan 425


> The fan in the oldest of my three Titan 425s (the original Titan) is
> a lot noisier than the others, so I'm thinking of a replacement. Does
> anyone know of a part number that might replace it?
>
> 73,
>
> Jim K9Y
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 



More information about the TenTec mailing list