[TenTec] New Orion, old problem? Questions from a new owner.
jack
jfriend31 at comcast.net
Mon Sep 15 18:42:23 EDT 2008
thank you Alan, jack
----- Original Message -----
From: "Alan Sewell N5NA" <alan.n5na at gmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Monday, September 15, 2008 7:40 AM
Subject: Re: [TenTec] New Orion, old problem? Questions from a new owner.
> The hardware mod is not needed to try/use version 2 firmware. The sweep
> will not work though without the hardware mod.
>
> If the hardware mod is done it does not have to be undone to be able to
> go back to the version 1 firmware.
>
> So, there's really no reason NOT to give the version 2 firmware a try
> and do the hardware mod. You never know, you may even like version 2!
>
> 73,
>
> Alan N5NA
>
> http://www.tentecwiki.org
>
>
>
> jack wrote:
>> I have been running 1.373b5 (experimental) for a year or so. now and
>> again
>> the radio quits working. so far a shut down and restart fixes the
>> problem.
>> one can go to
>> http://radio.tentec.com/service/downloads/
>> to get 1.372 (the latest factory firmware for the original Orion) if so
>> desired. i have chosen not to modify the Orion to accept the 2.x versions
>> of
>> firmware as i have heard no compelling reason to move that way. one can
>> not
>> easily undo the modification to accept 2.x firmware.
>> i have copies of firmware 1.358-1.372 as well as 1.373b3 and 1.373b5. i
>> run
>> the latter two on my Orions.
>> so far the problem you note has not stopped me from a good chat or
>> chasing
>> DX when there is any i can hear.
>> good luck.
>> jack
>> ak7o
>>
>>
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
More information about the TenTec
mailing list