[TenTec] What am I missing here?

[Duane Calvin]

I'll bet the ProIII switches to CW-R (as they call it) just like my IC-706
does.  That ought to solve the problem.

	73, Duane

Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com  
 

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Dr. Gerald N. Johnson
Sent: Friday, September 26, 2008 8:39 PM
To: tentec at contesting.com
Subject: Re: [TenTec] What am I missing here?

On Fri, 2008-09-26 at 19:33 -0500, Ken Bessler wrote:
> Wow! Thanks for all the info, guys! There are several other factors
affecting my choice:
> 
> I would really like to have 6 meters - that was part of the draw to the
Pro III.
> I have experience with Power SDR lite (Softrock40).
> I am a 100% Linux convert since last spring.
> 
> I guess that kinda seals the deal or would anyone else like to chime in
with suggestions???
> 
> Ken KG0WX
> 
Icoms have a really bad habit for VHF operation. They shift to LSB for
CW. Many a QSO on 6m and up is done mixed mode running SSB and CW on the
same frequency, or modes are switched rapidly at both ends of a contact.
Going to LSB for CW is more disastrous than the FT-726 and 736 shifting
the receiver frequency without changing the display when switching
modes. Switch an Icom from USB to CW and it transmits about 1 KHz
outside the lower side of the other rig's filter, which makes it really
hard to hear unless its just across town. I heard one on 2m doing last
Monday during the 2m sprint. Its a BAAAAD Icom habit, that may be cured
but this local user didn't know how.

73, Jerry, K0CQ

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec