[TenTec] Orion RTTY Interface

[Rsoifer at aol.com]

I've had good results with the US Interface Navigator into the aux input of  
my O II.
 
73 Ray W2RS
 
 
In a message dated 4/2/2009 2:38:23 A.M. GMT Standard Time, n0kma at att.net  
writes:

I just  use the accy jack on the back of the radio directly to the 
soundcard  inputs and output.  Never have had a problem yet.  Not to  
mention saving you a hundred dollars or more.  Unless you don't want  to 
tie up the soundcard in your computer then i guess one of the  interfaces 
with a built in soundcard would be your best bet.  In the  past i have 
used the Signal Link USB with good  results.

http://www.dxengineering.com/Parts.asp?ID=2334&PLID=277&SecID=135&DeptID=41&Pa
rtNo=TIG-SL-USB

Todd
NØKMA



>  
>> Can anyone direct me to the best interface to use with a laptop  and sound 
>> card?  Tnx,   Jeff
_______________________________________________
TenTec mailing  list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

**************Feeling the pinch at the grocery store?  Make dinner for $10 or 
less. (http://food.aol.com/frugal-feasts?ncid=emlcntusfood00000001)