[TenTec] Corsair II buzz
Stan Barr
g0clv at dsl.pipex.com
Thu Apr 2 08:02:22 PDT 2009
yash at aol.com wrote:
> Gary
> ?I found my corsair II to pick up a hum/buzz if the supply is close to the rig ,moved it 3 feet away and all seems ok now. That was a 961? tt supply. Maybe comming from a source in your house?
> good luck
> dale wt4t
>
>
>
>
>
>
>
> -----Original Message-----
> From: Gary Smith <Gary at doctorgary.net>
> To: tentec at contesting.com
> Sent: Thu, 2 Apr 2009 9:01 am
> Subject: [TenTec] Corsair II buzz
>
>
>
>
>
>
>
>
>
>
> I've got a Corsair II I'm planning on recapping with Ultra Low ESR
> electrolytics. There's a high pitched buzz I can hear which is
> distracting somewhat but is mostly absent when the narrow filters are
> engaged.
>
> It was there when I sent it to the factory for repair several years
> ago and they found no problems but I notice it and it was not there
> on my Omni and is not there on my other radio (not a Corsair).
>
> Any suggestions of which board I might start replacing the caps on to
> eliminate this noise?
>
> Thanks!
>
> Gary
> KA1J
> _______________________________________________
I had that problem when the psu was on the right of the rig. Moving it
to the left cured it.
--
Cheers and 73,
Stan Barr G0CLV G-QRP 3369 g0clv at dsl.pipex.com
"Never leave well enough alone." - Raymond Loewy
More information about the TenTec
mailing list