[TenTec] Orion RTTY & Soundcard

[Dick Williams]

Make sure you have MMTTY set up correctly in the Misc setup and that you 
have the correct soundcard selected in the soundcard setup menu.   I think 
the Tx Port in the Misc setup has to be on Sound??

I can't verify this for sure as I use FSK (which I highly suggest with the 
O2 as this sets the filters and passband automatically for RTTY) and have 
the COM-TxD (FSK) box checked.

Dick K8ZTT


----- Original Message ----- 
From: <k1zn at cox.net>
To: <tentec at Contesting.com>
Sent: Thursday, April 09, 2009 7:20 PM
Subject: [TenTec] Orion RTTY & Soundcard


>I am setting up my Orion for Digital direct from Laptop soundcard.  Using 
>TT Aux Cable, and MMTTY, have white and yellow audio cables installed. 
>Print RTTY FB on Laptop.  Can't XMT.  in XMT mode, ORION does not enter XMT 
>mode.  Settingss in MENU are:  VOX  VOX TRIP = 75%; Anti-VOX = 50% (have 
>tried down to 5%); VOX Hang =0.25sec/ SSB - AUX INPUT GAIN = 72 (have gone 
>dn to 25); TX AUDIO SOURCE = BOTH; h/w Mic Gain = 0.5db / AUDIO left/right 
>= main
>
> Any suggestions???
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec