[TenTec] Aux I/O connection

[Bob McGraw - K4TAX]

RED is for FSK input and BLACK is for PTT.

Normally not needed to be connected with a sound card.

73
Bob, K4TAX

----- Original Message ----- 
From: "Stephen Cannon" <sugar_bears_home at yahoo.com>
To: "'Discussion of Ten-Tec Equipment'" <tentec at contesting.com>
Sent: Sunday, April 19, 2009 7:26 AM
Subject: Re: [TenTec] Aux I/O connection


> Jack,
> Are the other two cables from the Orion II Aux I/O port plug (the red and
> black cables) supposed to be connected?
>
>
> Stephen
>
> -----Original Message-----
>
> John, if you look at your manual and the I/O cable that comes with the
> Orion, you will note that cable has red, white, black and yellow ends.
> all are phono plugs.
> get a 1/8" adapter for each to plug into the sound card on your
> computer.
> white from the Orion goes to BLUE on your sound card.
> yellow from the Orion goes to PINK on your sound card.
>
> use stereo plugs for the sound card.
>
> jack ak7o
>
>
> the white from your I/O (from the Orion) goes to the On Sat, 2009-04-18
> at 20:48 -0400, John B. Egger wrote:
>> I'm hoping to get started on digital modes (other than CW, that is) but
>> face a problem right at the start. My computer has "Speaker out" (used
>> for its speakers), "Line In," and "Mic In" jacks (all 1/8" stereo). The
>> auxiliary cable's white phono plug is for "Line In", but I have no "line
>> out" on my computer. Does it go (through a phono-to-stereo-plug adapter)
>> to the computer's "Line In" jack?
>>
>> Obviously I'm on the ground floor with this. Other connections, and
>> software (I have Fldigi, Xlog, and Twpsk) issues will come later.
>>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>