[TenTec] Aux I/O connection

[Jack B. Friend]

Stephen

the RED on the Orion 1 is for "future" assignment ...

the BLACK is for PTT on the Orion 1 ...

i do not know what the O2's changes may be in that regard. i have neer
used the PTT as i have no mike at all. all my operation has been CW or
PSK31. there has been no need for PTT.


jack

On Sun, 2009-04-19 at 06:26 -0600, Stephen Cannon wrote:
> Jack,
> Are the other two cables from the Orion II Aux I/O port plug (the red and
> black cables) supposed to be connected?  
> 
> 
> Stephen 
> 
> -----Original Message-----
> 
> John, if you look at your manual and the I/O cable that comes with the
> Orion, you will note that cable has red, white, black and yellow ends.
> all are phono plugs. 
> get a 1/8" adapter for each to plug into the sound card on your
> computer.
> white from the Orion goes to BLUE on your sound card.
> yellow from the Orion goes to PINK on your sound card.
> 
> use stereo plugs for the sound card.
> 
> jack ak7o
> 
> 
> the white from your I/O (from the Orion) goes to the On Sat, 2009-04-18
> at 20:48 -0400, John B. Egger wrote:
> > I'm hoping to get started on digital modes (other than CW, that is) but 
> > face a problem right at the start. My computer has "Speaker out" (used 
> > for its speakers), "Line In," and "Mic In" jacks (all 1/8" stereo). The 
> > auxiliary cable's white phono plug is for "Line In", but I have no "line 
> > out" on my computer. Does it go (through a phono-to-stereo-plug adapter) 
> > to the computer's "Line In" jack?
> > 
> > Obviously I'm on the ground floor with this. Other connections, and 
> > software (I have Fldigi, Xlog, and Twpsk) issues will come later.
> > 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec