[TenTec] [YCCC] orion and computer control

[Barry N1EU]

I'd go ahead and try the Orion with N1MM Logger Steve.  There's no
"radio address" that you have to worry about - that was back in the
Omni V days if I'm not mistaken.  Make sure you're using a straight
through serial cable and not a null modem (crossover) cable.

73 & happy holidays,
Barry N1EU

On Fri, Dec 25, 2009 at 2:26 PM,  <w1dxh at aol.com> wrote:
>
> can't get radio to talk to computer, settings are 57600 baud,no parity, 8 data bits, 1 stop it and handshake dtr/rts. dx4win says some radios such as tentec and icom require radio address? what does tentec use, can't seem to find this info. also want to use n1mm with tentec orion and need to set up. any help appreciated, this is all new to me as I never ad m Orion hooked up to computer. Thanks and Merry Christmas to all.
>
> 73,
> Steve W1DXH
> _______________________________________________
> YCCC Reflector mailto:yccc at contesting.com
> Yankee Clipper Contest Club  http://www.yccc.org
> Reflector Info: http://lists.contesting.com/mailman/listinfo/yccc
>
>