[TenTec] Omni V.9 cpu/pll

[Rick Williams]

Let's try that again without the reformatting by Yahoo.

Rick
---------------------------------------------------------------------------

Will, I no longer own an Omni V.9 but I found my notes.  There are 2 things
that can be done:
  
(1) See section 3.3.5 in manual  - Power off  - Push Reset button (on the
side of the Omni V) and hold >> then turn the power back on while holding
reset button  5 seconds; or

(2) Power off >> Hold CLR/CLK>> Power on >> hold CLR/CLK for 5 seconds

On rare occasions the Omni V.9 CPU will lock and reset option #2 above has
successfully reset the unit.

That's what my notes say.  Good luck and HNY.



73,

Rick

VE7TK



Website:  http://www3.telus.net/ve7tk <http://www3.telus.net/ve7tk>