[TenTec] Ig drift on amps

d.e.warnick at comcast.net d.e.warnick at comcast.net
Sat Feb 7 18:37:59 EST 2009

Check out this URL. It's at the TenTec Wiki. Just replace the capacitors with doorknobs. I got mine from e-bay, but haven't done the mod yet. Enough of the right guys on this reflector say it's the thing to do for me to believe it. 



----- Original Message ----- 
From: "Jim Brown K9YC" <k9yc at audiosystemsgroup.com> 
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com> 
Sent: Saturday, February 7, 2009 5:49:07 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [TenTec] Ig drift on amps 

On Sat, 7 Feb 2009 16:09:07 -0600, Duane Calvin wrote: 

>Yes, Ron, I've experienced the same symptoms in my 238B 

Ten Tec uses N1500 caps in the 229 and 238 tuners. Some matching 
conditions cause these caps to carry a lot of current, enough to 
cause them to change value by a fair amount. There are also matching 
conditions that cause them to burn up. I run 229s and 238s with my 
Titan during contests at the 1.2 kw level. I own six of these 
tuners, and I've fried at least one cap in all but one of them. 

On the oldest of my tuners, a 229B, I had enough heating around the 
front end of the rotary inductor to toast the spring that holds the 
traveling tap in contact with the inductor. I managed to repair it 
with a replacement spring that I found in a surplus house. 


Jim K9YC 

TenTec mailing list 
TenTec at contesting.com 

More information about the TenTec mailing list