[TenTec] 041 firmware rev

John brazos at rochester.rr.com
Fri Feb 27 17:57:54 PST 2009


I am using windows xp.          I am gonna scrap this attempt and try again 
.  John
----- Original Message ----- 
From: <kc9cdt at aol.com>
To: <tentec at contesting.com>
Sent: Friday, February 27, 2009 7:48 PM
Subject: Re: [TenTec] 041 firmware rev


> What OS are you using...I use XP.
> VISTA IS NOT WELCOME HERE for lots of reasons. Serial support being one.
> 73,
> Lee
>
>
> -----Original Message-----
> From: Jim M. <jmiller1706 at cfl.rr.com>
> To: 'Discussion of Ten-Tec Equipment' <tentec at contesting.com>
> Sent: Fri, 27 Feb 2009 6:33 pm
> Subject: Re: [TenTec] 041 firmware rev
>
>
>
> Should take 5 minutes.  I had to get a USB to Serial adaptor to get it to
> work rather than use the serial card in the PC.  I don't know why.
>
> -----Original Message-----
> From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
> On Behalf Of John
> Sent: Friday, February 27, 2009 6:22 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] 041 firmware rev
>
> I have been updating now for over an hour and have only got to line 1050 
> out
>
> of 10,000 lines should I be patient or just scrap the attempt ?
> ----- Original Message ----- 
> From: "John" <brazos at rochester.rr.com>
> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
> Sent: Friday, February 27, 2009 6:11 PM
> Subject: Re: [TenTec] 041 firmware rev
>
>
>> When downloading the new firm ware should the radios screen show a 
>> counter
>> of the lines being downloaded ( am in Flash Update Mode ) my radio does
>> not
>> show any running totals John
>> ----- Original Message ----- 
>> From: "Jim M." <jmiller1706 at cfl.rr.com>
>> To: "'Ron Castro'" <ronc at sonic.net>; "'Discussion of Ten-Tec Equipment'"
>> <tentec at contesting.com>
>> Sent: Friday, February 27, 2009 5:37 PM
>> Subject: Re: [TenTec] 041 firmware rev
>>
>>
>>> Well I downloaded it off the web a few times and apparently got a copy
>>> that
>>> works ok now.  I wonder if TT puts some sort of checksum or other
>>> integrity
>>> check on the file?  If you are getting some weird behavior you might try
>>> another download off the web until something changes.
>>>
>>> -----Original Message-----
>>> From: tentec-bounces at contesting.com
>>> [mailto:tentec-bounces at contesting.com]
>>> On Behalf Of Ron Castro
>>> Sent: Friday, February 27, 2009 4:49 PM
>>> To: Discussion of Ten-Tec Equipment
>>> Subject: Re: [TenTec] 041 firmware rev
>>>
>>> http://radio.tentec.com/downloads/transceivers/566
>>>
>>>         Ron   N6IE
>>>      www.N6IE.com
>>>
>>> ----- Original Message ----- 
>>> From: "Jim M." <jmiller1706 at cfl.rr.com>
>>> To: "'Discussion of Ten-Tec Equipment'" <tentec at contesting.com>
>>> Sent: Friday, February 27, 2009 1:41 PM
>>> Subj
> ect: Re: [TenTec] 041 firmware rev
>>>
>>>
>>>> On the phone with TT, he suggested various reset sequences but the load
>>>> won't work.  Said file might have been corrupted and to download it
>>>> again,
>>>> still no luck.  Now reverting back to previous version, hope I didn't
>>>> crash
>>>> my radio.  Could someone give me that download site again just to be
>>>> sure?
>>>>
>>>> -----Original Message-----
>>>> From: tentec-bounces at contesting.com
>>>> [mailto:tentec-bounces at contesting.com]
>>>> On Behalf Of kc9cdt at aol.com
>>>> Sent: Friday, February 27, 2009 4:13 PM
>>>> To: tentec at contesting.com
>>>> Subject: Re: [TenTec] 041 firmware rev
>>>>
>>>> Make sure stop on error is ON,
>>>> Lee
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Jim M. <jmiller1706 at cfl.rr.com>
>>>> To: 'Discussion of Ten-Tec Equipment' <tentec at contesting.com>
>>>> Sent: Fri, 27 Feb 2009 4:04 pm
>>>> Subject: Re: [TenTec] 041 firmware rev
>>>>
>>>>
>>>>
>>>> Well not having a lot of luck here.  Somehow crashed the O2 first time
>>>> trying with an old serial card in the PC, and it was very slow.  Got a
>>>> USB
>>>> to serial converter and it flashed in about 5 mins this time but 
>>>> nothing
>>>> in
>>>> the radio works, no knob, no buttons, and the display reads all zeros
>>>> frequency.  Am trying the flash again.  Stay tuned.  So far I am
>>>> underwhelmed.
>>>>
>>>> -----Original Message-----
>>>> From: tentec-bounces at contesting.com
>>>> [mailto:tentec-bounces at contesting.com]
>>>> On Behalf Of Peter Frenning [OZ1PIF]
>>>> Sent: Friday, February 27, 2009 3:57 PM
>>>> To: Ron Castro; Discussion of Ten-Tec Equipment
>>>> Subject: Re: [TenTec] 041 firmware rev
>>>>
>>>> Ron Castro skrev:
>>>>> I have noticed that the levels between the AF and RF AGC's are quite
>>>>> different.  The AF is very low compared to RF.
>>>>>
>>>>>          Ron Castro
>>>>>  Chief Technical Officer
>>>>>     Results Radio, LLC
>>>>>                N6IE
>>>>>       www.N6IE.com
>>>>>
>>>> Same here, but doesn't seem to have detrimental effects other than you
>>>> have to twist up the AF
> encoder...
>>>>
>>>> -- 
>>>> Vy 73 de OZ1PIF/5Q2M, Peter
>>>>
>>>> ** CW: Who? Me? You must be joking!! **
>>>> email: peter(no-spam-filler)@frenning.dk
>>>> http://www.frenning.dk/oz1pif.htm
>>>> Ph. +45 4619 3239
>>>> Snailmail:
>>>> Peter Frenning
>>>> Ternevej 23
>>>> DK-4130 Viby Sj.
>>>> Denmark
>>>> ***********************************
>>>>
>>>>
>>>> _______________________________________________
>>>> TenTec mailing list
>>>> TenTec at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>
>>>> _______________________________________________
>>>> TenTec mailing list
>>>> TenTec at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>
>>>> _______________________________________________
>>>> TenTec mailing list
>>>> TenTec at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>
>>>> _______________________________________________
>>>> TenTec mailing list
>>>> TenTec at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>>
>>>
>>>
>>> -- 
>>> I am using the free version of SPAMfighter.
>>> We are a community of 6 million users fighting spam.
>>> SPAMfighter has removed 302 of my spam emails to date.
>>> Get the free SPAMfighter here: http://www.spamfighter.com/len
>>>
>>> The Professional version does not have this message
>>>
>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>
>>
>>
>> -- 
>> I am using the free version of SPAMfighter.
>> We are a community of 6 million users fighting spam.
>> SPAMfighter has removed 1605 of my spam emails to date.
>> Get the free SPAMfighter here: http://www.spamfighter.com/len
>>
>> The Professional version does not have this message
>>
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tent
> ec
>>
>
>
> -- 
> I am using the free version of SPAMfighter.
> We are a community of 6 million users fighting spam.
> SPAMfighter has removed 1605 of my spam emails to date.
> Get the free SPAMfighter here: http://www.spamfighter.com/len
>
> The Professional version does not have this message
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


-- 
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 1605 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len

The Professional version does not have this message





More information about the TenTec mailing list