[TenTec] 1208 Transverter
waltk8cv4612amos at att.net
waltk8cv4612amos at att.net
Thu Jan 15 08:54:21 EST 2009
Dude .......... why not just buy a stand alone 2 meter rig for a $100 and be
done with it ?
Walt K8CV Royal Oak, MI.
----- Original Message -----
From: "David Cuttler" <davidcuttler at yahoo.com>
To: <tentec at contesting.com>
Sent: Wednesday, January 14, 2009 11:42 PM
Subject: Re: [TenTec] 1208 Transverter
Again, I want to thank everyone for their input. I learned a lot, and I am
sure that anyone else lurking in the backround has too.
This is what I plan to do. I will unsolder the two diodes, and solder in
segments cut from a DIP socket. The kind with the nice round machined pins.
I will then have sockets so I will never need to work on the board with a
soldering iron again. This will allow me to try different diodes as plugins.
If I should fry some, all, I will need to do is remove the cover, and plug
in two more.
I could tape a small plastic bag with replacements inside the cover.
Any comments?
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
More information about the TenTec
mailing list