[TenTec] Ground, noise blankers in the Omni V and plasma TV's

[Bob McGraw - K4TAX]

Short the pins on the AC plug together with a suitable jumper and then 
attach same to your station ground.  TV RFI problem solved.

Most plasma radiation is through the screen from the very high voltage 
switching transients.  My experience with a plasma TV was solved when I 
replaced it with a LCD.

73
Bob, K4TAX


----- Original Message ----- 
From: "Scott Sheppard" <scottsheppard at videotron.ca>
To: <tentec at contesting.com>
Sent: Sunday, January 18, 2009 7:17 PM
Subject: [TenTec] Ground, noise blankers in the Omni V and plasma TV's


> The TV has to be on.likely the swtching pwr supply---although igniting
> that plasma results in the noise being transmitted thru the
> screen.taking off the antenna eliminates the noise...
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>