[TenTec] UCW-100 CW Interface

[jack User]

i run the Orion which REQUIRES a STEREO jack for both front and back CW
keying. the center ring is NOT connected for keyer or bug or straight
key. i have the internal keyer turned off. a Vibroplex bug runs in the
front jack, 1/4 inch. MixW keys my Orions (either of 2 of them) in the
back jack which is 1/8th inch size. both can be used all the time. i
have never had a problem keying my radios from either source.
jack
ak7o


On Mon, 2009-06-29 at 21:11 -0400, Richards wrote:

> Could the fact it the one has a three pin jack ... and the 
> other has a two pin jack... make a difference to how he 
> connects this device?   Would having the rig's internal 
> keyer on change the way the front key jack operates?
> 
> ===========  K8JHR  ==================
> 
> jack User wrote:
> > yes, it should run in the same jack as a straight key.
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec