[TenTec] possible bug in new Orion II firmware

[george]

Bruce;
The tuner works fine on my O2 with the new FW. I tuned my O2 into a 360 foot 
flat top fed with 450 ohm ladder line with a balun near the shack on 40, 
160, 30 and 80 meters on the low end of the bands.
As a matter of fact, it now shows the SWR when I key it in CW. Can't 
remember if it did that on the previous FW?
So far everything is working on this end.
George W2YJ