[TenTec] NEW Orion II/2.041XL Bug?

[Gene Henderson]

Dave  You are on to something there as you change screen colors so does the 
sweep trace and the tip color also changes to the primary color of the 
screen.   Thanks  Gene WB9HLA
----- Original Message ----- 
From: "Dave G3RXP" <g3rxp at btinternet.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Monday, March 09, 2009 7:27 PM
Subject: Re: [TenTec] NEW Orion II/2.041XL Bug?


> Dear Orion 2 users.
> Ive had the new s/w installed for a couple of weeks, and generally I 
> really
> like most of the changes.  I don't get any problems with the display 
> however
> I am running colour  3 (English spelling) in the LCD menu options which
> doesn't have any Red in it so I wonder if  all the other guys are running
> Colour 1?
> I like the improvement in the CW side tone -before it was pretty bad at
> times and even sounded like a slugish bug key.
>
> I am not able to completely turn off the 2nd receiver by turning down the
> A/F gain (R/F gain High and 7Mhz at night) I can still hear stations.So I
> have to turn down the R/F as well.
>
> At one time I was pressing buttons to go split and the 2nd receiver stuck 
> on
> 7.016Mhz. Rotating the 2nd VFO knob changed the Freq display but didn't
> change the receive Audio that was still on 7.016. I had to switch the rig
> OFF/ON and it started to work OK. I did have this on the old S/W so may be 
> I
> caused the problem - getting old.
>
> I like the Blue flying widget but it would be nice to see a graticule i.e
> vert bars as a measure of off freq. If its out of the band I dont want to
> QSY    hi...
>
> I mostly operate CW so Im sure Ive missed a lotta of other good features. 
> As
> a CW rig its great, however diode switching instead of a reed relay would
> have been the bees knees.
>
> Dave G3RXP
>
>
>
>
> ----- Original Message ----- 
> From: <kc9cdt at aol.com>
> To: <tentec at contesting.com>
> Sent: Monday, March 09, 2009 10:22 PM
> Subject: Re: [TenTec] NEW Orion II/2.041XL Bug? Red Scan
> WithVerticalLinePatterns
>
>
>> Once mine goes red...I have to turn sweep off/on to get it going right
>> again...That's not a feature.
>>
>> 73,
>> Lee
>>
>>
>>
>> -----Original Message-----
>> From: Stuart Rohre <rohre at arlut.utexas.edu>
>> To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
>> Sent: Mon, 9 Mar 2009 4:21 pm
>> Subject: Re: [TenTec] NEW Orion II/2.041XL Bug? Red Scan With
>> VerticalLinePatterns
>>
>>
>>
>> Didn't someone point out that a type of sound card software uses a red
>> screen to indicate when there has been an overload in the signal path?
>> A number of sound card programs work this way.  Transient signals have
>> been reported just before someone notices the red screen.  I would say
>> this is a reasonable warning signal that too much gain, or a very large
>> transient has been received.
>>
>> Stuart
>> K5KVH
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
>>
>>
>> E-mail message checked by Spyware Doctor (6.0.0.386)
>> Database version: 5.11920
>> http://www.pctools.com/uk/spyware-doctor-antivirus/
>
>
>
>
>
> E-mail message checked by Spyware Doctor (6.0.0.386)
> Database version: 5.11920
> http://www.pctools.com/uk/spyware-doctor-antivirus/
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>