[TenTec] R-320 Question

[DW Holtman]

Hello,

Thanks for the responses. I built a cable and the RX-320 works great. It is 
an amazing receiver.

Best,
DW Holtman
WB7SSN

----- Original Message ----- 
From: "Dr. Gerald N. Johnson" <geraldj at storm.weather.net>
To: <tentec at contesting.com>
Sent: Monday, March 16, 2009 4:30 PM
Subject: Re: [TenTec] R-320 Question


> On Mon, 2009-03-16 at 16:05 -0600, DW Holtman wrote:
>> Hello,
>>
>> Quick question. Is the serial cable from an R-320 a straight cable? That 
>> is,
>> is pin 1 wired to pin 1 etc?
>>
>> Thank you,
>> DW Holtman
>> WB7SSN
>>
> Pins 1 and 7 on a 25 pin serial cable are chassis and signal grounds.
> They are always wired straight. 2, 3, 4, 5, 6, 8, and 20 are signals
> that are sometimes crossed. Much the same applies to 9 pin but I don't
> have those pin numbers memorized.
>
> 73, Jerry, K0CQ
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec