[TenTec] poor harsh audio on OMNI-V

[yash at aol.com]

 Jerry
?the bpt seems to work as it should,varies the signal as it should ,except the signal STARTS off as the poor audio signal. I did notice the BPF and the fade controls do next to nothing for the audio the fade is ok ,but the BFP does nothing.... I noticed the BFP does cut the audio width from 200 to 1700 while it is in use, per the manual.? possiable the curcuit is not dropping out somehow? this seems to me the 200 to 1700? would have the no bass, tinny sound I am hearing. Ive never had a rig with a BFP before ,maybe my understanding of its use is not corect?
dale wt4t


 


 

-----Original Message-----
From: Dr. Gerald N. Johnson <geraldj at storm.weather.net>
To: tentec at contesting.com
Sent: Sat, 28 Mar 2009 11:53 am
Subject: Re: [TenTec] poor harsh audio on OMNI-V










On Sat, 2009-03-28 at 08:48 -0400, yash at aol.com wrote:
>  Jerry
> ? after reading your comments and a few others,think you hit the problem. No 
longer have a decent bench,so will see if I can hunt up the gear to go thru the 
rig.
> thanks
> dale wt4t
> 
> 
>  
> 
Before you leap into tweaking the BFO, see what the bandpass tuning and
alternate filter selections do for the audio quality you wish.

73, Jerry, K0CQ

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec