[TenTec] poor harsh audio on OMNI-V

Bob McGraw - K4TAX RMcGraw at Blomand.net
Sat Mar 28 19:34:17 PDT 2009


Sounds like those need an alignment as well.  Perhaps a previous owner has 
"tweaked" the radio a bit.  The Omni series radios have a very specific 
alignment procedure that must be followed.  It does require a signal 
generator capable of known and accurate frequency and known output level as 
well as a frequency counter of known accuracy.

Diddling with the radio with unknown test equipment accuracy will likely end 
up with a radio performing as you indicate.

73
Bob, K4TAX


----- Original Message ----- 
From: <yash at aol.com>
To: <geraldj at storm.weather.net>; <tentec at contesting.com>
Sent: Saturday, March 28, 2009 2:06 PM
Subject: Re: [TenTec] poor harsh audio on OMNI-V


>
> Jerry
> ?the bpt seems to work as it should,varies the signal as it should ,except 
> the signal STARTS off as the poor audio signal. I did notice the BPF and 
> the fade controls do next to nothing for the audio the fade is ok ,but the 
> BFP does nothing.... I noticed the BFP does cut the audio width from 200 
> to 1700 while it is in use, per the manual.? possiable the curcuit is not 
> dropping out somehow? this seems to me the 200 to 1700? would have the no 
> bass, tinny sound I am hearing. Ive never had a rig with a BFP before 
> ,maybe my understanding of its use is not corect?
> dale wt4t
>
>
>
>
>
>
>
> -----Original Message-----
> From: Dr. Gerald N. Johnson <geraldj at storm.weather.net>
> To: tentec at contesting.com
> Sent: Sat, 28 Mar 2009 11:53 am
> Subject: Re: [TenTec] poor harsh audio on OMNI-V
>
>
>
>
>
>
>
>
>
>
> On Sat, 2009-03-28 at 08:48 -0400, yash at aol.com wrote:
>>  Jerry
>> ? after reading your comments and a few others,think you hit the problem. 
>> No
> longer have a decent bench,so will see if I can hunt up the gear to go 
> thru the
> rig.
>> thanks
>> dale wt4t
>>
>>
>>
>>
> Before you leap into tweaking the BFO, see what the bandpass tuning and
> alternate filter selections do for the audio quality you wish.
>
> 73, Jerry, K0CQ
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 




More information about the TenTec mailing list