[TenTec] poor audio on OMNI-V

[Dr. Gerald N. Johnson]

On Sun, 2009-03-29 at 14:24 -0400, yash at aol.com wrote:
>  Jerry
> ?what is the pin1 issue?
> ? the problem is on receive audio.
> dale wt4t
> 
In some Tentec radios there is a problem combining PTT return and
microphone return and shield return, going to the PC board, not to the
case and that injects RF into the audio board. The cure as I recall is
to separate audio and PTT returns from the shield and ground the shield
of the microphone cable to the case. But I don't know this goes back as
far as the Omni V. I think it was something new with the early
production Orion.

73, Jerry, K0CQ