[TenTec] OMNI D

[Dr. Gerald N. Johnson]

On Tue, 2009-05-12 at 09:06 -0400, Cal Zethmayr wrote:
> I have been the happy user of a TEN TEC OMNI D for a little over 2 years.
> Gets great signal reports on every band I work from 80-10 meters.  Have a D-104(trans amp) mike, MFJ Versa tuner, feeding ladder line to a double zep 60' up between some very tall trees. It has all 3 filters. They are great in filtering down the qrm.
> 
> Someone told me recently that changing the filters also changes the transmitted audio as they are switched down to filter the received audio.  I've read and re-read the manual and don't find anything that says the filters make any changes to the transmitted audio?
> 
> Comments anyone?
> 
> Cal Zethmayr
> W4GMH at COX.NET
> 
Generally Tentecs always transmit with the basic 9 MHz SSB filter. If
you change that one from the stock filter, you will change the transmit
audio bandpass.

73, Jerry, K0CQ