[TenTec] O2 - High/Low Cut Anomaly

wa3fiy at radioadv.com wa3fiy at radioadv.com
Sun Nov 22 10:54:02 PST 2009


Keith, that's the way my O Classic works too.  I think that is the correct 
action for high cut.  I take advantage of this feature by leaving the "CUT" 
control set to high cut ("H") and the PBT/BW control set to "PBT".  This way 
I have a control dedicated to each function.  I change bandwidth with the  
CUT control and change passband tuning with the PBT/BW control.

-Lee-

WA3FIY


On 22 Nov 2009 at 3:28, ac9s at mchsi.com wrote:

> Although I rarely use the the "Cut" control, I was playing with it
> today and noticed that "high" and "low" cut seem to have different
> actions.  Low cut appears to act as advertised, with the passband
> shifting and bandwidth changing in tandem as the control is rotated. 
> The "high" cut appears to only change the bandwidth.  Thinking this
> might be related to the sideband I tried both lower and upper sideband
> with the same result.  I am using the current Beta - 2.041XT.
> 
> Anyone else notice the same behaviour?
> 
> Thanks --
> 
> Keith
> AC9S
>


More information about the TenTec mailing list