[TenTec] Pegasus 550

[Dr. Gerald N. Johnson]

Solder wick. The types with the finer wire in the braid works best. 60 
watt temperature controlled soldering iron.

73, Jerry, K0CQ

On 4/1/2010 10:36 AM, davkozy at comcast.net wrote:
> Thanks all for your suggestions!!  I did find a source for replacement
> relays www.onlinecomponents.com <http://www.onlinecomponents.com> that
> had them in stock. ($1.77 ea. + Shipping) I'm waiting for them to arrive.
> Hope to find the time to install now with the nice weather setting in.
>
> Anyone have any tricks for easy desoldering?
>
> Dave KB9EPL
>
>
>
> ----- Original Message -----
> From: "phil g" <trapperpg at earthlink.net>
> To: geraldj at weather.net, "Discussion of Ten-Tec Equipment"
> <tentec at contesting.com>
> Sent: Monday, March 29, 2010 2:52:24 PM GMT -06:00 US/Canada Central
> Subject: Re: [TenTec] Pegasus 550
>
> I never noticed the pull-in voltage. I had that link bookmarked in my
> pegasus files as a replacement. I think it came from this list. I no
> longer have my 550, but maybe someone out there is adventurous and could do
> a voltage check.
>
> There is a 5v version listed, apparently also made of unobtainium.
>
> http://www.newark.com/panasonic-ew/als2b05tw/miniature-power-relay/dp/45M7085
>
> n4zsa
> ----- Original Message -----
> From: "Dr. Gerald N. Johnson" <geraldj at weather.net>
> To: <tentec at contesting.com>
> Sent: Monday, March 29, 2010 2:36 PM
> Subject: Re: [TenTec] Pegasus 550
>
>
>  > The part number indicates a 12 volt coil.
>  >
>  > 73, Jerry, K0CQ
>  >
>  > On 3/29/2010 12:21 PM, Denton wrote:
>  >> I used to have a Peggy, and one of the relays on the band pass filter
>  >> board
>  >> failed...if I remember right, the relay coils for both input and output
>  >> of
>  >> the filter are wired in series...I replaced mine with two new relays
> that
>  >> had 6 volt coils.
>  >> ----- Original Message -----
>  >> From: "phil g"<trapperpg at earthlink.net>
>  >> To: "Discussion of Ten-Tec Equipment"<tentec at contesting.com>
>  >> Sent: Monday, March 29, 2010 11:04 AM
>  >> Subject: Re: [TenTec] Pegasus 550
>  >>
>  >>
>  >>> Here is a link to the relay. Also avail. from Ten Tec.
>  >>> http://www.newark.com/jsp/search/productdetail.jsp?SKU=45M7086
>  >>>
>  >>> Fairly straight forward to replace. Unsolder the old, solder in the
>  >>> new.
>  >>>
>  >>> n4zsa
>  >>> ----- Original Message -----
>  >>>
>  > _______________________________________________
>  > TenTec mailing list
>  > TenTec at contesting.com
>  > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>