[TenTec] [dxlab] Commander 8.5.8 is available

[CSM(r) Gary Huber]

With the release of Commander 8.5.8,

Commander slider command sequences now work with TenTec Omni-VII for AF, RF, BW, and Squelch (in addition to the previously announced VFO commands)

-AF ( '*U<B1><13> )

-RF ( '*I<B1><13> )

-BW ( '*W<B1><13> )

-SQ ( '*H<B1><13> )

Those sequences are referenced from Radio Mode Command Set, pages 16 - 20, of the OMNI-VII, Model 588,  Programmers Reference Guide, Revision 1.009.

>From Commander, you can vary the BW of each VFO (as long as the mode is different in each) by dragging the slider with the computer mouse. The AF, RF, and Squelch are also available on by using the computer mouse to drag to the desired level. There is some delay / overshoot if the slider is rapidly pulled. 

Thanks to Dave AA6YQ and John KI4JPL for their continued support of their respective products and for allowing me to Beta test.

Best regards,

CSM(r) Gary Huber - AB9M
9679 Heron Bay Rd
Bloomington, IL 61705
(309-662-0604)
www.csm-gh.com
glhuber at msn.com
gary.huber at us.army.mil


From: aa6yq 
Sent: Friday, August 13, 2010 12:57 PM
To: dxlab at yahoogroups.com 
Subject: [dxlab] Commander 8.5.8 is available


  
This release

- makes the Main window's VFO B selection button work correctly with a Kenwood TS-570 (tnx to Dave G4MUL)

- makes the Main window's XFC button work correctly with a TenTec Omni VII (tnx to Chris NJ5N)

- extends the slider substitution command syntax to insert 1-byte and 2-byte binary values, as is required in user-defined sliders that control a TenTec Omni VII (tnx to Gary AB9M and John KI4JPL)

- updates the CommandSequences.htm documentation file

Commander 8.5.8 is available via the DXLab Launcher and via W8DH

<http://www.dxlabsuite.com/download.htm>

73,

Dave, AA6YQ



__._,_.___
Reply to sender | Reply to group | Reply via web post | Start a New Topic 
Messages in this topic (1) 
Recent Activity: a.. New Members 13 a.. New Files 10 
Visit Your Group 
MARKETPLACE
Get great advice about dogs and cats. Visit the Dog & Cat Answers Center.

 

--------------------------------------------------------------------------------

Hobbies & Activities Zone: Find others who share your passions! Explore new interests.

 

--------------------------------------------------------------------------------

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

  Switch to: Text-Only, Daily Digest . Unsubscribe . Terms of Use.
 
__,_._,___
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: S1.txt
Url: http://lists.contesting.com/pipermail/tentec/attachments/20100813/f41b062a/attachment.txt 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: S2.txt
Url: http://lists.contesting.com/pipermail/tentec/attachments/20100813/f41b062a/attachment-0001.txt 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: S3.txt
Url: http://lists.contesting.com/pipermail/tentec/attachments/20100813/f41b062a/attachment-0002.txt 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: S4.txt
Url: http://lists.contesting.com/pipermail/tentec/attachments/20100813/f41b062a/attachment-0003.txt