[TenTec] Intermitten Omni VI RX Falloff

[Art Trampler]

Jerry,

I'm not familiar with switch on back of rig for AUX RX...only on front of
rig next to AGC.

Am I missing something?

Funny how many (different) answers one question got!

Art

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Dr. Gerald N. Johnson
Sent: Thursday, August 19, 2010 10:21 PM
To: tentec at contesting.com
Subject: Re: [TenTec] Intermitten Omni VI RX Falloff

Aux RX switch on the back of the radio. Needs cleaning.

73, Jerry, K0CQ

On 8/19/2010 10:15 PM, Art Trampler wrote:
> Hey All,
>
>
>
> On my Omni VI Opt 3, the RX periodically drops off 20 to 25db, using a
> 6db/S-unit scale.  If I wiggle the RF gain it can pop back, or if I go key
> down for one “dih.”  I haven’t tried simply closing the PTT to restore (as
> opposed to any transmission) but I think that would also do it.
>
>
>
> I’d think “Relay” or “Diodes” if it only popped back with closing the
> PTT/sending; I’d think bad solder joint if it was only the RF gain.
What’s
> interesting is that the RX is not lost, just significantly
> reduced/attenuated.
>
>
>
> Your thoughts?
>
>
>
> Thanks,
> Art
>
>
>
> Art Trampler, KØRO
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.851 / Virus Database: 271.1.1/3082 - Release Date: 08/19/10
13:35:00