[TenTec] TITAN 425 PS maintenance

Mike, K9UW k9uw at wi-net.com
Fri Dec 3 17:42:21 PST 2010


Ron, is THIS the article, you're referencing?

http://www.hamradiomarket.com/articles/Titan%20P%20Hybrid.htm

73, de Mike, K9UW
Amherst, WI

On 12/3/2010 3:26 PM, Ron Castro wrote:
> There was an article from a ham in Texas on the internet on modifying the
> 425 for 3CPX800's but I can't find it.  I recall it required an entire new
> supply, including a custom-built Hypersil transformer from Peter W. Dahl
> that ran more voltage and current than the original and fit in the power
> supply cabinet.  With the higher plate voltage, less drive was required, and
> lower grid current for legal power, but I think the real object was to run
> much more than legal power.  The author claimed he tested the modified amp
> at 3.2 kW PEP out..."on a dummy load of course" (yeah, right!).  I guess
> everything's bigger in Texas!
>
> Like one Texan told me: "Go big or stay home"....
>
>              Ron  N6IE
>         www.N6IE.com
>
> ----- Original Message -----
> From: "Jim Brown"<k9yc at audiosystemsgroup.com>
> To:<tentec at contesting.com>
> Sent: Friday, December 03, 2010 1:04 PM
> Subject: Re: [TenTec] TITAN 425 PS maintenance
>
>
>> One thing you would need to consider is what other high voltage
>> capacitors are in the RF deck that might need to be replaced with parts
>> rated for higher voltage.
>>
>> As I understand it, the main reason for using higher voltage with 3CPX
>> tubes is that you can achieve legal power with less plate current. I
>> don't know if there would be reduced drive requirement, or less grid
>> current. Since the primary failure mechanism in these tubes is excessive
>> grid current, that's what I would pay the most attention to.
>>
>> Also, I don't know what's in this board, but to get higher voltage, you
>> would probably have to replace the power transformer as well.
>>
>> The only condition under which I would look at this board as a
>> replacement is if most of the power supply went up in smoke. :)
>>
>> 73, Jim K9YC
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>



More information about the TenTec mailing list