[TenTec] Argonaut V-Jupiter-Signalink USB and Digital

[James C. Owen, III]

Not wanting to re-engineer something that likely already has been done. Here's 
my problem! Recently  got on the digital modes with a signalinkUSB that works 
fine with the Argonaut V, all gain controls pretty much centered. Connected to 
the Jupiter and had nothing but overdrive even with all gain controls at 
minimum. I then looked at the spec's of the two. Argonaut V 100mv into 47 ohms, 
Jupiter 1mv into 47 ohms. So the Jupiter is 100 times more sensitive, so that's 
the problem. I'm thing of a simple T attenuator  which will require me to make 
another cable. Has anyone come up with a good simple solution?
73 Jim K4CGY