[TenTec] Help with Centurion Amp

[Randy Fulco]

I only get mine to work by being by using the 15m position. Won't work right on 20, I have Centurion and Titan

--- On Sun, 1/10/10, Jim Brown K9YC <k9yc at audiosystemsgroup.com> wrote:

From: Jim Brown K9YC <k9yc at audiosystemsgroup.com>
Subject: Re: [TenTec] Help with Centurion Amp
To: "tentec at contesting.com" <tentec at contesting.com>
Date: Sunday, January 10, 2010, 12:40 PM

On Sun, 10 Jan 2010 03:26:18 -0800 (PST), Joe Palmer wrote:

>Can't get it to work on 17 meters.  Any comments appreciated.

My three Titan 425s work on 17M in the 20M position of the 
bandswitch (and on 12M in the 15M position). In both cases it puts 
out full power, and tuning is at the low extremes of the two 
capacitors. The Titan 425 was designed around 1980 when ham 
allocations on those bands didn't yet exist, but were being 
proposed). 

73,

Jim K9YC


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec