[TenTec] Looking for NB for Triton 544

[Ken Burchfield]

Mike,
I would appreciate the schematics and info on the Noise Blanker, I have a  544.
Thanks for your help...........73 Ken
k5jxl at yahoo.com


 PacketRadio is Still Alive.......Mississippi.......145.010.......Simplex.......1200 Baud



--- On Mon, 7/26/10, Mike Hyder -N4NT- <Mike_N4NT at charter.net> wrote:

From: Mike Hyder -N4NT- <Mike_N4NT at charter.net>
Subject: Re: [TenTec] Looking for NB for Triton 544
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Date: Monday, July 26, 2010, 12:07 PM

There were minor circuit differences between my 544 and Omni-C blankers. 
The Omni-C blanker did not work nearly as well.  I set the schematics 
side-by-side and made the Omni-C correspond.  Seems it was more like minor 
rewiring but it has been a looooong time ago (and I've slept since then).  I 
do recall that it was an easy project -- probably not taking more than an 
hour of a lazy man's time.  I can dig out the manuals and send schematics 
and images of the physical board layout (components, but not the traces). 
If I had the gumption, I could pull the boards and scan the traces, I 
suppose.

I would guess that Ten-Tec would give their blessing to your effort.

Mike N4NT