[TenTec] Jupiter power issue, It would me too.....

[al sirois]

I'd call the factory
alsirios at roadrunner.com
or n1mhc at arrl.net
=================

-----Original Message-----
From: Michael Goins [mailto:wmgoins at gmail.com] 
Sent: Saturday, July 31, 2010 2:01 PM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] Jupiter power issue

Putting the Jupiter station back together and I seem to have a problem.

When I hook the rig via the wattmeter to a dummy load and put the
internal Jupiter meter in "power" and key the rig, I show 20 watts,
regardless of where it is set on the power range in the Jupiter's
menu. When I am at 0 in the menu, I have 20 watts. At 50%, 20 watts.
At 100%, 20 watts. I am running the output through an external meter
to the dummy load, and the internal meter matches what the external
meter is showing.

I am new to the Jupiter, and I don't know if it's me missing something
or having something in the wrong position, or if I have a power output
issue, but it's got me worried.

Mike, k5wmg
Pipe Creek, Texas
Fast cars, slow boats, big dogs, old trucks, little radios, and
summers off to write
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec