[TenTec] Orion 2 Firmware 2.044A Released

[Rsoifer at aol.com]

Ron,
 
The NR problem has been fixed (!) but the old low-output problem on AM is  
back.  Mine measures 11 watts carrier power, max.  It worked  fine with 
2.041XT.
 
73 Ray W2RS
 
 
In a message dated 6/11/2010 2:17:05 A.M. GMT Standard Time, ronc at sonic.net 
 writes:

I have  adjusted the "Wish List" for the Orion II to reflect the newest 
version of  the firmware.  It's at www.N6IE.com

Ron  N6IE
www.N6IE.com

----- Original Message ----- 
From: "Harry G McGavran  Jr" <w5pny at arrl.net>
To: <tentec at contesting.com>
Sent:  Thursday, June 10, 2010 5:50 PM
Subject: Re: [TenTec] Orion 2 Firmware  2.044A Released


>
> With this one I can set the side-tone  level all the way
> up to 65 before the pops begin, and by the time  one
> gets past 80 on towards 99 the distortion on the
> side-tone  is still really bad -- BUT -- for me at
> least, levels are 50-60 are  all I need and that is
> now distortion free, at least with a 610 Hz  sidetone
> which is the only one I tested or use.  I also  am
> using the speaker and not headphones for this.
> Since one  gets the side-tone every time the SPOT
> button is used, the side-tone  distortion was really
> objectionable with 2.043B.
>
> The  NR seems better too, but most all the time I don't
> really need it --  and it's nice not to have artifacts that
> sound like NR action on the  side-tone which the side-tone
> is set to 50-60.
>
> There  are a few CAT wierdnesses here and there, but the reliability
> of  sending a strings of "*" commands seems better.
>
> Unless  something else crops up, I think I can live with this
>  release...
>
> 73 --
>
> Harry,  W5PNY
>
>
>
>
>
> -- 
>
>  Harry G. McGavran, Jr.
>
> E-mail:  w5pny at arrl.net
>
>
>
>  _______________________________________________
> TenTec mailing  list
> TenTec at contesting.com
>  http://lists.contesting.com/mailman/listinfo/tentec
>  

_______________________________________________
TenTec mailing  list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec