[TenTec] bugs in Orion firmware 2.044A

[Toby Pennington]

I just loaded version 2.044A and came from 2.039d.   The rig automatically did a master reset going from the old version to the new. 

I am experiencing the same thing as has been reported.  If the BW on cw is set to 400hz when the rig is booted up it will go to 500hz.   On ssb,  I can set the BW to 2900hz and upon booting the rig up,  the band width will go immediately to 3000hz.  

I don't consider this a really big issue unless other perimeters are being changed along with the receive CW and SSB BW. 

Toby  W4CAK