[TenTec] Omni VI Trouble Shooting Question

[Rick - NJ0IP / DJ0IP]

Check the power supply.


-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Roger Rippy
Sent: Sunday, June 20, 2010 10:18 AM
To: TenTec at contesting.com
Subject: [TenTec] Omni VI Trouble Shooting Question

Thanks Don (N5AQ); I did a search of the archives 
and did not find a situation that would be close
to my issue. When this rig loss leds and control
function this morning, it had not been in use except
it was turned on while I was checking a DX Cluster
spot on the Internet. I heard this steady tone from
the rig and then looked over to the ham desk to see
the situation that I described. This happened several
weeks ago and like then, I turned off the rig and 
then turned it back on and all was well. The previous
occurance was on June 11th and in that case I had 
to turn it off twice before I got it back to "normal".
The past two occurences were when the rig was set 
to 30 meters, but I was not transmitting at the time.

Never a dull moment!!Hi Hi Thanks Don.
73s Roger Rippy (Rip)  W7RIP  Bozeman, MT



      
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec