[TenTec] Crimp pins
Dr. Gerald N. Johnson
geraldj at weather.net
Wed Jun 23 15:55:21 PDT 2010
Tentec is also a good source. I don't have my Corsair II manual handy
with the part numbers, but they have been posted on this forum repeatedly.
digging in the supposedly searchable list archives, I found I posted the
numbers Jan 27, 2009 and said:
> You don't have to work that hard. Its the Amp Universal Mate-N-Lok II
> connector line. 4 pins. Plug housing on the cable, 770019. Female or
> socket pins in the plug, 770247. Strain relief 641776-2. Based on my Amp
> sheet IS 3200. There are several from Amp that will mate. Last I looked
> for them, they were available from Mouser as well as TenTec. Maybe $3 a
> set for all the pieces, before shipping.
The Molex connector pins used on most yaecomwood rigs are .084" diameter.
The remote connectors have been molex but the power connectors have not
been molex at Tentec, mostly.
73, Jerry, K0CQ
On 6/23/2010 5:32 PM, Dennis Jones wrote:
> Thank you for your reply.
> The connectors and pins needed are for the Delta 2 and Jupiter, both
> for 13.8 power.
> The weird thing is that they are not .093 nor .062 size. HHmmm
> DJ K6RCL
> On Jun 23, 2010, at 3:13 PM, Dr. Gerald N. Johnson wrote:
>> Mouser. www.mouser.com. Remote VFO connectors are a different family
>> than the power connectors. Take different pins too.
>> 73, Jerry, K0CQ
>> On 6/23/2010 5:09 PM, Dennis Jones wrote:
>>> TO: TT group,
>>> Where may I find the molex conectors used in the Ten Tec gear?????
>>> Rat Shack no go. But used to stock them.
>>> DJ K6RCL
>>> Goleta, Calif.
>>> TenTec mailing list
>>> TenTec at contesting.com
>> TenTec mailing list
>> TenTec at contesting.com
> TenTec mailing list
> TenTec at contesting.com
More information about the TenTec