[TenTec] Model 1208 Transverter

N4PY2 n4py2 at earthlink.net
Mon Mar 15 06:07:43 PDT 2010


The 1209 converts 144 to 50 mhz.  You will enjoy the 1208.  I used one with 
my Orion for a long time and it worked very well.  Yes, just keep the power 
at 5 watts and all will work well.  Be very careful to never accidentally 
put more then 20 watts into it.  If you do, you will blow a switching diode 
in the radio.  I can tell you this from experience.  And it is very easy to 
forget to reduce the power.

Carl Moreschi N4PY
121 Little Bell Drive
Hays, NC 28635
www.n4py.com


----- Original Message ----- 
From: "Speer, Doug" <Doug.Speer at FairbanksMorse.com>
To: <tentec at contesting.com>
Sent: Monday, March 15, 2010 8:35 AM
Subject: [TenTec] Model 1208 Transverter


>I attended the Jefferson, WI hamfest this past Sunday and on an impulse I 
>purchased a Model 1208, 6m transverter.  Just out of curiosity does anyone 
>know the differences between the 1208 and 1209 models?  I plan to attempt 
>to use the transverter with my Scout 555 for portable operation.  Other 
>than making sure I keep the Scout output down to 5 watts is there anything 
>else I should be aware?
>
> Doug, W9PN
> Janesville, WI
>
>
>
> ----------Legal Disclaimer----------
>
> The information contained in this message may be privileged and 
> confidential, and is intended solely for the use of the named addressee. 
> No other person is authorized to access, copy or re-use this message (or 
> any information contained herein).  If you are not the intended recipient, 
> please notify us immediately by replying to this message and delete it 
> from your computer.
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec 



More information about the TenTec mailing list