[TenTec] Corsair II Vfo Molex Jumper

[gsanderlin]

Hi Bob

I got the parts in to make a jumper.  I didnt order the gold pins. I should have checked to see if Ten Gtec used gold pins.  I couldnt see payin 70 cents a piece for pins.  Received my Mouser order yesterday.  Will put a jumper together today.  Will make a few spares should someone need one.

-----Original Message-----
From: Bwana Bob <wb2vuf at verizon.net>
Sent: Wednesday, March 24, 2010 21:44
To: geraldj at weather.net; Discussion of Ten-Tec Equipment <tentec at contesting.com>
Subject: Re: [TenTec] Corsair II Vfo Molex Jumper

I didn't know that they were available with gold pins. That would help 
because the pins in mine seem to develop oxidation which causes the PTO 
to shift frequency.

				73,

				Bob WB2VUF

Dr. Gerald N. Johnson wrote:
> Shipping compared to the cost of the parts will shock you! Go with the 
> gold pins to help that shock a little.
> 
> 73, Jerry, K0CQ
> 
> On 3/21/2010 1:02 PM, gsanderlin wrote:
>> Thanks Jerry!
>>
>> Will order tomorrow..  I had requested that info from Tentec.  The guy spoke with in tech support said they didn't have any and did'nt have part numbers
>>
>> -----Original Message-----
>> From: Dr. Gerald N. Johnson<geraldj at weather.net>
>> Sent: Sunday, March 21, 2010 13:56
>> To: tentec at contesting.com
>> Subject: Re: [TenTec] Corsair II Vfo Molex Jumper
>>
>> Molex 03-06-2092 or 03-06-2091 with male pins 02-06-2103 or 02-06-6103.


[The entire original message is not included]