[TenTec] FS: Tentec Omni D Series B

[Louis Ciotti]

No I dea, but the issues to me are minor, I just don't have time to
fix them.  If it does not sell, then I will just keep it.  Shipping is
like $30+ depending on how far it has to travel.

On Thu, May 20, 2010 at 10:23 AM, David Goncalves
<davegoncalves at gmail.com> wrote:
> Might that be a little high for a project Omni D with no accessories?
>
> David Goncalves
>
> On Thu, May 20, 2010 at 10:05 AM, Louis Ciotti <lciotti1 at gmail.com> wrote:
>
>> OK So I have decided since I do not have time to tinker with this
>> radio I am going to sell it off so someone can get some use out of the
>> radio.  It works for the most part.  The 7MHz band is intermittent, as
>> well as the upper portion on 10m (29MHz+).  I picked this up as a
>> project radio.  I have traced the 7MHz problem to the crystal
>> connector, but the 10M problem I have not found.  If I lightly press
>> on the crystal for the 7MHz band it will work.  I suspect the
>> connection is dirty and a good cleaning will make it come alive.
>> Power output is 100% as far as I can tell, and  made a DX contact to
>> France on 15M with it shortly after I picked that radio up.   $250
>> shipped to the lower 48.
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>
>
>
> --
> David Goncalves
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>