[TenTec] Paragon - easy to work on?

[Ben Hall]

On 5/26/2010 10:13 PM, Bwana Bob wrote:
> The front panel is on hinges. Take off the top and bottom covers.  There
> will be a screw on each side of the front panel. Remove these 2 screws
> and the panel will swing down, giving you access to the pots. Be careful
> not to put any strain on the potentiometer leads, or the phenolic on the
> back of the pot will break.

Hi Bob,

THANKS MUCH for posting this!  Last night I was able to get a little 
Deoxit into the RF gain pot but was really struggling with how I was 
going to access the other pots.  This will make it much easier and I 
really appreciate it!

thanks much and 73,
ben, kd5byb
-- 
Ben Hall, kd5byb at kd5byb.net - ALWAYS OUTNUMBERED, NEVER OUTGUNNED.